How to set up Tasmota to control LED strips individually on a single H801 controller

The H801 LED controller is a versatile, Wi-Fi enabled LED controller based on ESP chips. It can be easily flashed with Tasmota and configured to control multi-channel colored LED strips or multiple single-color LED strips.

This post explains how I configured the Tasmota firmware to control 2 separate LED strips independently. According to this excellent write up at tinkerman each channel is driven by a 60V N-Channel mosfet rated for 35A or 106W maximum power dissipation.

Affiliate Content Start

Apple AirPods 4 Wireless Earbuds, Bluetooth Headphones, with Active Noise Cancellation, Adaptive Audio, Transparency Mode, Personalized Spatial Audio, USB-C Charging Case, Wireless Charging, H2 Chip

(523)

$157.83 (as of November 18, 2024 02:39 GMT +08:00 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)

Gabb Watch 3e - Smart Watch for Kids - GPS Tracker for Kids, Kids Digital Watch w/Unlimited Talk & Text, Parental Controls, No Social Media, No Internet, SOS Button, 30 Activation Fee (Dark Gray)

(77)

$74.99 (as of November 18, 2024 02:39 GMT +08:00 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)

USB-C to 3.5mm Audio Headphone Adapter - HiFi 2 Pack Compatible with Apple iPhone 16 15 Samsung Galaxy S24 S23 S22 S21 Plus Pro Max Ultra Pixel iPad - Type C to Jack Dongle Adapter

(310)

$9.99 (as of November 18, 2024 02:39 GMT +08:00 - More infoProduct prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.)

Affiliate Content End

Note: Be sure to confirm your Length of LED strip does not exceed the single channel maximum current for H801 to avoid burning out the mosfets.

Common Tasmota Settings for LED strips

Reading the Tosmata commands documentation, I found some interesting settings that allowed me to setup the H801 wifi LED controller to control multiple single colour led strips.

Note: that Speed is not referring to wall clock time. If your controller sleeps for 250ms each cycle, then a 1s sleep setting will actually result in a “speed” of 4 seconds.

So the firmware does support smooth fading. Now to find a way to integrate it into Home Assistant.

The Tasmota Commands Documentation is a very interesting (but long) read. I encourage everyone to check it out and take the time to go through it. I ended up finding much easier ways to accomplish things because they had already implemented what I needed.

Tasmota Template for H801 Wifi LED controller

{"NAME":"H801_Custom","GPIO":[0,0,0,0,0,0,0,0,41,0,0,0,0],"FLAG":0,"BASE":20}

The following options allow you to split the various colour channel outputs into individually controlled LED channels. Rather than having a unified interface for selecting RGBW colours, this allows you to control upto 5 LEDs strips (one for each “Colour” channel on the controller). See image below for Tasmota interface.

H801 GPIO pin mapping and Tasmota name

See the pin mapping below:

Home Assistant Light Configuration

Integrating this type of Tasmota setup into home Assistant was a little tricky. I pasted my YAML config below. Note how the command_topic references the individual channels denoted by cmnd/son_bedroom_led/PowerN where N in the number 1-4. Similarly, state is reported back on stat/son_bedroom_led/RESULT for all channels and the correct channel value must be selected using state_value_template.

Advertisement Begins

Advertisement End

light:
  - platform: mqtt
    name: Bedroom Led
    state_topic: "stat/son_bedroom_led/RESULT"
    command_topic: "cmnd/son_bedroom_led/Power3"
    state_value_template: "{{ value_json.POWER3 }}"
    brightness_state_topic: "stat/son_bedroom_led/RESULT"
    brightness_command_topic: "cmnd/son_bedroom_led/Channel3"
    brightness_value_template: "{{ value_json.Channel3 }}"
    brightness_scale: 100
    optimistic: false
    qos: 1
  - platform: mqtt
    name: Headboard Led
    state_topic: "stat/son_bedroom_led/RESULT"
    command_topic: "cmnd/son_bedroom_led/Power2"
    state_value_template: "{{ value_json.POWER2 }}"
    brightness_state_topic: "stat/son_bedroom_led/RESULT"
    brightness_command_topic: "cmnd/son_bedroom_led/Channel2"
    brightness_value_template: "{{ value_json.Channel2 }}"
    brightness_scale: 100
    optimistic: false
    qos: 1

Conclusion

This post explained how to separate the LED channels on H801 controllers using a Tasmota template. This allows us to control multiple single colour LED strips independently using the same controller. I find this useful when there are multiple LED strips connected to the same power supply and can be controller by the same Wifi controller. Check out my post on home cinema lighting automations for examples.

Featured Content Start

Products for sale on my Etsy Store

Additional card sets are available on my store already. I am planning to create new flashcards in the future to expand into other areas of music theory and piano practice. Check my store for all available learning materials

• Rhythm training (200 flashcards!) – Etsy Product Link
• Major scales – Etsy Product Link
• Minor scales – Etsy Product Link
• Arpeggio drills – Coming Soon
• Cadences – Coming Soon
• Chord progression & improvisation – Coming Soon
• Jazz & Blues Scales – Coming Soon

Get 10% off your order by using the following link: Use code BLOGVISITOR10

Featured Content End